PHOSPHATE FERTILIZER PRODUCTION – PHOSPHORIC ACID / FUME SCRUBBERS
Depending on the process technology and the source of the emission, the nature of the emissions (content quantity and type of contaminant) determines the best design of scrubber in each case. HF, H2FiS6 (FSA), P2O5 and NH3 are the...
learn more »
PHOSPHORIC ACID / SCRUBBER EXIT DROPLET SEPARATORS
Most Air Scrubbers treating gas emissions to atmosphere in Phosphoric Fertiliser plants (MAP, DAP, NPK etc) have a Chevron Vane type or a mesh type droplet separator on the exit to catch liquid droplets.
These Chevron Vanes and mesh pads can block, and need replacing from...
learn more »
PHOSPHORIC ACID / WAGON LOADING – FUGITIVE EMISSIONS CONTROL
Product Loading Stations transfer Phosphorous to (railway) wagons, and this generates both P4 dust and P2O5 vapours, which escape into the atmosphere.
Phosphorous and Phosphoric Acid particles come from the air around the product transportation & loading operation...
learn more »
The New Hongda experience and quality ensures the best design of agitator (and also tank + baffle design if required) for all reactor tank and thickener tanks.
Begg Cousland have been a distributor outside China for this equipment for more than 10 years....
learn more »
PHOSPHATE FERTILISER PRODUCTION – P2O5 Separation from Phosphate Slurry
Phosphoric Acid is extracted from Phosphate slurry by wash watering it on a rotating table vacuum filter, where the P2O5 content is drawn off by vacuum through the meshes on the table, and through drainage pipes underneath. The residual...
learn more »
PHOSPHATE FERTILISER INDUSTRY
Begg Cousland Envirotec have a close collaboration with Lebracs Rubber in the Phosphate Fertiliser sector, where the service conditions are stringent with elevated temperature of up to 110 ºC, high pressure and Vacuum service. You can source these materials though us also.
Lebracs Rubber has a range...
learn more »