fbpx

Products

Filters

Demisters / Knitted Wire / Mesh Pad

Becoil Knitted Wire Mesh Demisters
In many industrial processes it is necessary to use demisters to remove mist or spray droplets from air or gas streams in order to purify the gas, remove liquid which would contaminate the subsequent process, damage downstream equipment, constitute an undesirable atmospheric emission, or to...
learn more »

Filters

Coalescers / Knitted Wire / Mesh Pad / Co-Knit

Becone Knitted Mesh Coalescers
The Becoil Demister is a high efficiency, low pressure loss device for removing liquid particles in excess of 5 microns. To further the collection efficiency of liquid particles below 5 microns, Becone Coalescers were developed.
Coalescers
Aerosol mist produced in industry applications such as in the natural gas...
learn more »

Filters

Cylindrical Coalescers

Coalescers in Cartridge Cylinder Form 
Today, two stage filter separator technology allows you to have the smallest possible vessel diameter, resulting in the lowest cost, while removing aerosol liquids and solid particles efficiently. The separator’s first stage contains replaceable BCE-GLF  coalescing filters mounted on a tube sheet. Here the larger...
learn more »

Filters

Candle Filters / Mist Eliminators

Becofil Candle Filter
The Becofil Candle Filter, often commonly referred to as a Mist Eliminator or Fibre Bed Filter – is intended primarily for the removal of very fine mist particles of less than 2 microns. A combination of impingement for removing greater than 1-2 microns and diffusion for finer, sub-micron size particles where...
learn more »

Filters

Vane Packs / Chevrons / Droplet Separators

‘Becovane’ Chevron Vane Pack Droplet Separators
Chevron type vane packs are high velocity droplet separators. They can be specially designed for efficient droplet collection >8 microns in diameter, but traditionally they are used for more coarse droplet collection, 10 – 20 microns or larger.
They also have a good resistance...
learn more »

Gas Cleaning

Rotary Brush Scrubber / Becoflex

‘BECOFLEX’ Rotary Brush Scrubber
Begg Cousland’s specialization in the fields of wet gas filtration and gas cleaning means it has found many applications with a need for efficient solid/gas removal. Now following original research and development, we offer the brilliantly simple ‘Rotary Brush Scrubbing System’ BECOFLEX. It can be used on...
learn more »

Gas Cleaning

Gas Scrubbers / Absorption Columns / Venturi Scrubbers / Fume Scrubbers

Gas Scrubbers
Begg Cousland have designed and supplied many gas scrubbers and absorber systems to a variety of chemical and process industries.
We design and supply Venturi Gas Scrubbers, Eductor Venturi Gas Scrubbers, Wet Cyclones, Packed Bed Scrubbers and Cross Flow Scrubbers using conventional tower and packing designs or tailoring new...
learn more »

Gas Cleaning

Tower Packings / Random Packings / Tower Internals

Packings, Packing Supports and other Tower Internals
Ceramics
Begg Cousland can supply high quality, competitively priced ceramic saddle and ring packings for chemical process towers including for Sulphuric Acid and Chlorine production, carefully sourced from our partners.
Typical Ceramic Saddle Chemical Composition (%) :



learn more »

Gas Cleaning

Turnkey Filtration Systems

Package Gas Scrubbing and  Filtration Systems
Begg, Cousland have supplied hundreds of highly successful turnkey filtration system installations, used for industrial air pollution abatement, often known as Tail Gas Cleaning or APC equipment. Depending on the application and pollutant, and location of the process plant, we can design the system...
learn more »

Process Equipment

Inlet Diffusers

BCE-EFQ Inlet Diffusers
In many plants there is a problem of bad gas distribution, entering (or leaving) a separator vessel. We can design and supply Inlet Diffusers, to allow the installed internals to work properly, new or retrofit.
The Inlet Diffuser can be a specially designed array of deflector plates, directing...
learn more »