fbpx

Applications

Compressed Gas

Gas Filter › Removal of Oil or Water from Plant Air

COMPRESSED PLANT AIR

Air is compressed on site for instruments, power tools etc.
These compressors can entrain water or oil into the air.
Up to 70,000 mg/m3 of oil and/or water can be present.
PROBLEMS TO SOLVE
Contamination of air quality.
Water or oil in compressed air...
learn more »

Asphalt

Gas Cleaning › Organic Fume from Tanks & Spreading

Asphalt
Asphalt is used for road surfacing and also for producing coated protective sheeting materials. Air pollution problems arise from hot vent vapour from Asphalt storage tanks or fugitive vapours from loading it into trucks / wagons. In the coating process, there are environmental problems from the Asphalt saturator &...
learn more »

Titanium Dioxide

Filter › Chorine Process Mist Elimination

TITANIUM DIOXIDE / CHLORIDE PROCESS – HYDROCHLORIC ACID FILTRATION

Hydrochloric Acid can be emitted from many industrial processes, where it is either used in that form, or generated from the process.
HCl will usually be in fine, sub-micron mist form.
The gas comes from the process or vapours...
learn more »

Titanium Dioxide

Gas Cleaning › Chloride Process Gas Scrubbing

TITANIUM DIOXIDE / CHLORIDE PROCESS HCl & TiO2 DUST SCRUBBERS

Hydrochloric Acid can be emitted from many industrial processes, where it is either used in that form or generated from the process.
HCl will usually be in fine, sub-micron mist form.
The gas comes from the process and...
learn more »

Pharmaceuticals

Gas Cleaning › Vent Gas Scrubbers

PHARMACEUTICALS / HYDROCHLORIC ACID IN PROCESS  / TANK VENTING

Hydrochloric Acid can be emitted from many industrial processes, where it is either used in that form, stored with tank ventilation, or generated from the process.
HCl will usually be in fine, sub-micron mist form.
The gas comes from...
learn more »

Oil & Gas

Oil Refining › FCC Fractionator and Pipestill


The Fractionator is fed from the reactor and side strippers are injected with steam. Naphtha and Light Cycle Oil are produced.
In a Pipestill, fed from a crude furnace, the side strippers produce Jet A, Gas Oil and Diesel or Heavy Gas Oil.
PROBLEMS TO SOLVE
a) Prevent...
learn more »

Oil & Gas

Oil Refining › Vacuum Unit


The Vacuum Unit is fed with Crude Bottoms and is injected with steam. Passing upwards through wash oil stages, the gas exits to an overhead condenser, where cleaned gas goes to LT Ends, and Naphtha and Light Cycle Oil are produced as liquids.
From side streams the Vacuum...
learn more »

Oil & Gas

Oil Refining › Merox Unit


In (UOP) Merox Units, where crudes are acidic, Caustic is used to reduce H2S traces and the Mercaptan Sulphur content. Caustic Treating Systems are done with a Pre-Washer followed by a Reactor vessel.
The mixture is then fed to a liquid-liquid separator to remove the water and caustic from...
learn more »

Liquid-Liquid Separation

Internals for Liquid-Liquid Separators

COALESCERS
Coalescers in Cylinder Form
Today, two stage filter separator technology allows you to have the smallest possible vessel diameter, resulting in the lowest cost, while removing aerosol liquids and solid particles efficiently. The separator’s first stage contains replaceable BCE-GLP coalescing filters mounted on a tube sheet. Here the larger...
learn more »

Liquid-Liquid Separation

Oil-Water, Water-Oil and Other 2 Phase Separator Packages

‘Becophase’ Liquid-Liquid Coalescers
Coalescing technology and media are also used to separate immiscible liquids. These are typically emulsions or hazy mixtures, and by separating them it can reduce the volume of contaminated liquid effluent, or improve a process or a final product quality. There are many different separation needs in...
learn more »