fbpx
Process Equipment › Acid Distributors

Sulphuric Acid

Process Equipment › Acid Distributors

SULPHURIC ACID / ACID DISTRIBUTION

PROCESS INFORMATION

For effective gas / sulphuric acid contact in the ceramic packing bed in a Drying Tower or Absorbing Tower, the acid must be distributed evenly and consistently over the cross sectional area inside the tower. The type and volume of the packing is also depending on a good distributor performance.

PROBLEMS TO SOLVE

Even distribution per m2 of packing surface / tower cross section area.
Consistent pressure / flow of acid over the tower (no waves in troughs, no significant variations)
Allowing minimum packing height to be installed (cost) or design tower velocity (process), without negative impact on tower performance.
Corrosion resistance without unreasonable high cost impact

DESIGN SOLUTION

Pipe type distributor in cast iron or alloy materials (e.g. SX)
Trough type distributor in alloy materials (e.g. SX)

Begg Cousland can design and supply a range of pipe and trough type acid distributors for H2SO4 plant tower duty.

Pipe Distributor 2SX trough-type distributor