Water Purification / Treatment › Water & Effluent Treatment Industries

WATER TREATMENT

Begg Cousland Envirotec have a close collaboration with Lebracs Rubber for Water Treatment and Desalination Plant equipment and their inter-connecting pipe lines. You can source materials and equipment through Begg Cousland Envirotec.

Lebracs Rubber has a range of corrosion resistant rubber which meets the service Conditions of Sea Water, Raw water with Acidic condition, DM Water, Effluent Water and Waste Water with acidic condition.

Types of Rubber Compounds commonly used:

Natural rubber – Hard
Natural rubber – Soft, Food grade
Synthetic Rubber – Neoprene, Food grade

*Compound Code No.*	*Types of Rubber*	*Service Conditions*	*Hardness Range*	*Maximum Design Temperature*
LRL 8090	Natural Rubber – Hard	Brine Solution, Acidic Water, Sea water	75 ± 5º Shore ‘D’	80 °C
LRL 6070 S	Natural Rubber- Soft	DM Water Service	65 ± 5º Shore ‘A’	65 °C
LRL 6070	Natural Rubber- Food Grade Soft	Potable Water & Food Grade application	60 ± 5ºShore ‘A’	65 °C
LRL 6070N	Synthetic Rubber- Neoprene	Sea Water application	65 ± 5ºShore ‘A’	90 °C
LRL 6070 NFG	Synthetic Rubber- Neoprene- Food Grade	Desalination Plant	65 ± 5ºShore ‘A’	90 °C

NOTE: Technical Parameters may be changed due to continuous product development.

EFFLUENT TREATMENT

Rubber linings are widely used in Effluent Treatment Plant and in Gas scrubbing equipment and their inter-connecting pipe lines. You can also source these materials and equipment through Begg Cousland Envirotec.

Lebracs Rubber has a range of corrosion resistant rubber which meets the service Conditions of High temperature exhaust gases, Effluent Gases with acidic traces, Effluent Water and Waste Water with acidic condition.

Types of Rubber Compounds commonly used:

Natural rubber – Hard
Synthetic Rubber – Neoprene
Synthetic Rubber – Butyl

*Compound Code No.*	*Types of Rubber*	*Service Conditions*	*Hardness Range*	*Maximum Design Temperature*
LRL 8090	Natural Rubber – Hard	Exhaust gases, Sea water	75 ± 5º Shore ‘D’	80 °C
LRL 6070N	Synthetic Rubber- Neoprene	Effluent Water and Waste water with acidic condition	65 ± 5ºShore ‘A’	90 °C
LRL BY50	Synthetic Rubber – Butyl	Exhaust Gases with high. temperature & Gases with acidic traces.	52 ± 5ºShore ‘A’	100 °C

NOTE: Technical Parameters may be changed due to continuous product development.