-->
PVC / VINYL COATING – Heated Oven Fume Mist Eliminators
Most common manufacturing applications are Synthetic Leather (car upholstery, bags, shoes etc.), vinyl coated and linoleum flooring, vinyl coated wallpaper, laminated sheets (special films, belts, tarpaulins) and foam products.
Polyvinyl-chloride (PVC) is a thermoplastic and is mixed to...
learn more »
PVC / VINYL COATING – Direct heated oven / Indirect heated oven +lacquer / chlorinated additives
Most common manufacturing applications are Synthetic Leather ( car upholstery, bags, shoes etc.), vinyl coated and linoleum flooring, vinyl coated wallpaper, laminated sheets ( special films, belts, tarpaulins ) and foam products.
PVC / VINYL COATING – Indirect heated oven and no lacquer or chlorinated additives
Most common manufacturing applications are Synthetic Leather ( car upholstery, bags, shoes etc.), vinyl coated and linoleum flooring, vinyl coated wallpaper, laminated sheets ( special films, belts, tarpaulins ) and foam products.
Polyvinyl-chloride (PVC)...
learn more »
PVC / VINYL COATING – Plasticiser & Water Separation for Re-use
The plasticiser recovered from the Becosolve system can be an emulsion formed with water condensed from the cooled gas, and in the case of direct heated ovens, it can be dirty or black, which makes...
learn more »
NYLON YARN TEXTURIZING EMISSIONS
In the production of Nylon filaments, polymer is melted and then pumped through a sand filter to a spinnerette. The filaments formed by the spinerette are cooled and solidified by air, before going to a humidifying chamber to stabilise the length of the spun...
learn more »
P.T.A. / C.T.A. SILO VENT EMISSIONS IN POLYESTER FIBRE PRODUCTION
In a plant making Terephthalic Acid (a constituent for the production of Polyester fibres) the silos or hoppers which are filled by mechanical or pneumatic conveying of the material. Raw material (C.T.A.) feed silos in the preparation section...
learn more »
COMPRESSED GAS PRODUCTION PLANT
Gas is compressed into bottles for Industrial use.
Gas is compressed as part of an industrial process.
These compressors can entrain water or oil into the gas.
Examples :
Compressed CO2, H2 and CO – after compressing synthesis gas at 4,500 PSIG the...
learn more »
COMPRESSED PLANT AIR
Air is compressed on site for instruments, power tools etc.
These compressors can entrain water or oil into the air.
Up to 70,000 mg/m3 of oil and/or water can be present.
PROBLEMS TO SOLVE
Contamination of air quality.
Water or oil in compressed air...
learn more »
Asphalt
Asphalt is used for road surfacing and also for producing coated protective sheeting materials. Air pollution problems arise from hot vent vapour from Asphalt storage tanks or fugitive vapours from loading it into trucks / wagons. In the coating process, there are environmental problems from the Asphalt saturator &...
learn more »
The Fractionator is fed from the reactor and side strippers are injected with steam. Naphtha and Light Cycle Oil are produced.
In a Pipestill, fed from a crude furnace, the side strippers produce Jet A, Gas Oil and Diesel or Heavy Gas Oil.
PROBLEMS TO SOLVE
a) Prevent...
learn more »